• Grain Filling Machine

    Model: WTM-UVGF Series

    Application: 
    Reverse for grain fill on wood furniture, , panels etc.

    Specifications: 
    1. in  24”, 36”, 51” Widths
    2. : 2-80mm
    3. Min working length: 300mm 
    4. : 5-20m/min
    5. Available in single or double

    Feature:
    1. Italian JMC alloy reduction gear drive.
    2. Filler scrape wheel equipped with RV reducer to control scraper uniformity.
    3.  
    4. High-quality coupling transmission. NSK Japanese bearings.
    5. Conveyor belt is a 2MM anti-sliding PVC conveyor belt
    6. Precision automatic   for height adjustment
    7. All adjustments are fittied with individual counters

    Electrical Requirements: 
    : 460 Volt/60Hz/3 Phase

  • Airjet/IR Tunnel

    Airjet/IR Leveling Tunnel
    Used for drying and leveling of waterbased and reactive finishes

    Model: WTM-UVIR

    Specifications:
    1. in  24”, 36”, 51”
    2. : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 24', 36' and 48'
    5. : 800mm

    Features:
    1. is a
    2. Heating using far-infrared ray IR ceramic 0.3kw lamp tube and 30kw heating box.
    3. Temperature control adopts independent control, accurately control the temperature. The side cover of the oven is easy to be disassembled and installed convenient for maintenance.
    4. Side covers open for convenient lamp disassembly or maintenance. 
    5. 5.5KW high pressure fan, sprayed and dried by 38 jet tip

    :
    : 460 Volt/60Hz/3 Phase

  • Stain Brushing Machine

    Model: WTM-UVBR Series

    Model Name: 


    Specially designed for stain or other finishes on , flooring, panels etc. 

    Specifications:
    1. in  24”, 36”, 51”
    2. : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 2,3 or 4 head configurations
    5. : 800mm

    :
    1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
    2. Driving motor 1.5kw Schneider Inverter control
    3. The brush heads slide out for easy cleaning.
    4. Variable speed drives on each brush.

    Electrical Requirements:
    : 460 Volt/60Hz/3 Phase

  • Transfer Conveyor

    Automatic Transfer Conveyor

    Model: 
    WTM-UVC

    Specifications: 
    1. in  24”, 36”, 51”
    2. Workpiece thickness: 2-80mm
    3. : 5-20m/min
    4. Available in 6', 8', 10' lengths
    5. : 800mm
    6. Total power: 0.75kw

    :
    1. , belt thickness: 2mm thickness
    2. Conveyor use 0.75kw Taiwan RV63/30 reduction gears
    3. converter controls belt speed

    Electrical Requirements:
    : 460 Volt/60Hz/3

  • Double Head Roll Coater

    Double Head Roll Coater Specifications

    Model: WTM-UVRCD

    Application: 
    Roll coating for finish or on , flooring, panels etc.

    Specifications: 
    1. in  24”, 36”, 51”
    2. Work piece : 2-80mm
    3. Min working length: 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm


    1. Italian JMC Aluminum alloy reduction gear drive.
    2. Schneider  
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. is a 3MM anti-sliding PVC conveyor belt
    5. Precision automatic 0.75kw for height adjustment
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    Electrical RequirementsOperating voltage: 460 Volt/60Hz/3 Phase

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination


    Working widths: 24”, 42”, 51”: left 
    Enclosed MotorsBrush unit for cleaning after sanding

    General Technical Data: 
    WTM-QSG series machine is a precision sander with a movable feed belt for the setting.
    : 3/16” – 4”
    : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is . (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3
    ** Also available in a Double

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Working widths: 24”, 42”, 51”
    Service side: left Enclosed Motors
    Brush unit for cleaning panels after sanding

    General technical data: WTM-DSG series machine is a constant pass-line, bottom sanding machine, it is specially designed for a with a fixed height.Working thickness: 3/16” – 4”
    Minimum working length: 13”
    : 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:Operating : 460 Volt/60Hz/3
    ** Also available in a

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination


    Working widths: 24”, 42”, 51”
    : left 
    Enclosed Motors
    Brush unit for cleaning after sanding

    General technical data: 
    WTM-FSG series machine is a constant pass-line , it is specially designed for a sanding line with a fixed height
    : 3/16” – 4”
    length: 13”Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    Operating voltage: 460 Volt/60Hz/3
    ** Also available in a Double