Optimizing Saw
Optimizing Saw WTM-CS20x
Wood Dimensions:
Ingoing lengths min./max. 800mm – unlimited
Ingoing widths min./max. 50 – 300mm
Ingoing thicknesses min./max.2 – 12mm
Cross sections max. 300x5mmm max. 150x80mm
Cutting tolerance: +/- 0.5 – +/- 1.5mmCapacity:
Saw cycle: 1-6 times per second (servo drive)
Feed speed infinitely adjustable: 0-120 m/min.
Machine working height: 35”Electrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase
Full electrical load: 20.5 kW
Operating load: 8 kW
Operating voltage: 460 Volt/60Hz/3
PhaseAir consumption: approx. 1200 L/min.
Service pressure: approx. 30m/sec
Diameter of dust exhaust ducts: 120mm (2pcs)Denibbing Machine
Model: WTM-UVDB Series
Model Name:
Denibbing/sanding machine. This machine is for denibbing/sanding of wood furniture, flooring, panels etc.Specifications:
1. Available in 24”, 36”, 51” Widths
2. Work piece thickness: 2-80mm
3. Feeding speed: 5-20m/min
4. Available in 2-6 head configurations
5. Working height: 800mmFeatures:
1. Feed belt thickness 5mm, high temperature resistance fish bone belt.
2. Schneider Electronics
3. Delta frequency converter control each brushing heads individually
4. Adjustable height pressure roller- 2 rolls per head
5. Height counters with individual height adjustment
6. Multiple sanding grits, and brush lengths available
Optional – Precision automatic lifting motor for height adjustmentElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase
Wire Brushing/Denibbing Machine
Model: WTM-UVWB Series
Model Name:
Wire brushing/ Denibbing Sanding MachineApplication:
Wire brushing, embossment, texturing, of the grain in wood furniture, flooring, panels etc.Specifications:
1. Available in 24”, 36”, 51” Widths
2. Work piece thickness: 2-80mm
3. Min working length: 300mm
4. Feeding speed: 5-20m/min
5. Available in 2-6 head configurationsFeatures:
1. Feed belt thickness 5mm, high temperature resistance fish bone belt.
2. Schneider Electronics
3. Delta frequency converter control each brushing heads individually
4. Adjustable height pressure roller- 2 rolls per head
5. Height counters with individual height adjustment
6. Multiple wire diameter and bristle lengths available
* Optional -Precision automatic lifting motor for height adjustmentElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3 PhaseAirjet/IR Tunnel
Airjet/IR Leveling Tunnel
Used for drying and leveling of waterbased and reactive finishesModel: WTM-UVIR series
Specifications:
1. Available in 24”, 36”, 51” Widths
2. Work piece thickness: 2-80mm
3. Feeding speed: 5-20m/min
4. Available in 24', 36' and 48' lengths
5. Working height: 800mmFeatures:
1. Conveyor is a stainless steel net
2. Heating using far-infrared ray IR ceramic 0.3kw lamp tube and 30kw heating box.
3. Temperature control adopts independent control, accurately control the temperature. The side cover of the oven is easy to be disassembled and installed convenient for maintenance.
4. Side covers open for convenient lamp disassembly or maintenance.
5. 5.5KW high pressure fan, sprayed and dried by 38 jet tipElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3 PhaseTransfer Conveyor
Automatic Transfer Conveyor
Model:
WTM-UVC SeriesSpecifications:
1. Available in 24”, 36”, 51” Widths
2. Workpiece thickness: 2-80mm
3. Feeding speed: 5-20m/min
4. Available in 6', 8', 10' lengths
5. Working height: 800mm
6. Total power: 0.75kwFeature:
1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
2. Conveyor use 0.75kw Taiwan RV63/30 reduction gears
3. Schneider Frequency converter controls belt speedElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase