• Grain Filling Machine

    Model: WTM-UVGF Series

    Application: 
    Reverse roll coating for grain fill on , flooring, panels etc.


    1. Available in  24”, 36”, 51” Widths
    2. : 2-80mm
    3. Min working length: 300mm 
    4. : 5-20m/min
    5. Available in single or

    :
    1. Italian JMC alloy reduction gear drive.
    2. Filler scrape wheel equipped with RV reducer to control scraper uniformity.
    3. Schneider electronics 
    4. High-quality coupling transmission. NSK Japanese bearings.
    5. Conveyor belt is a 2MM anti-sliding PVC conveyor belt
    6. Precision automatic  lifting motor for height adjustment
    7. All adjustments are fittied with individual counters


    : 460 Volt/60Hz/3

  • Airjet/IR Tunnel

    Airjet/IR Leveling Tunnel
    Used for drying and leveling of waterbased and reactive finishes

    : WTM-UVIR series

    :
    1. Available in  24”, 36”, 51”
    2. : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 24', 36' and 48' lengths
    5. Working height: 800mm

    :
    1. is a
    2. using far-infrared ray IR ceramic 0.3kw lamp tube and 30kw heating box.
    3. Temperature control adopts independent control, accurately control the temperature. The side cover of the oven is easy to be disassembled and installed convenient for maintenance.
    4. Side covers open for convenient lamp disassembly or maintenance. 
    5. 5.5KW high pressure fan, sprayed and dried by 38 jet tip

    Requirements:
    Operating : 460 Volt/60Hz/3 Phase

  • Stain Brushing Machine

    Model: WTM-UVBR Series

    : 

    Application: 
    Specially designed for brushing stain or other on wood furniture, , panels etc. 

    Specifications:
    1. in  24”, 36”, 51” Widths
    2. Work piece : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 2,3 or 4 head
    5. Working height: 800mm

    :
    1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
    2. Driving motor 1.5kw Schneider Inverter control
    3. The brush heads slide out for easy cleaning.
    4. Variable speed drives on each brush.

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3 Phase

  • Transfer Conveyor

    Automatic Transfer Conveyor

    : 
    WTM-UVC Series

    Specifications: 
    1. in  24”, 36”, 51” Widths
    2. : 2-80mm
    3. : 5-20m/min
    4. Available in 6', 8', 10'
    5. Working height: 800mm
    6. : 0.75kw

    Feature:
    1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
    2. use 0.75kw Taiwan RV63/30 reduction gears
    3. Schneider controls belt speed

    Requirements:
    Operating voltage: 460 Volt/60Hz/3

  • Double Head Roll Coater

    Double Head Roll Coater Specifications

    Model: WTM-UVRCD series

    Application: 
    Roll coating for finish or on , flooring, panels etc.

    Specifications: 
    1. Available in  24”, 36”, 51” Widths
    2. Work piece : 2-80mm
    3. Min working length: 300mm 
    4. : 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm


    1. JMC Aluminum alloy reduction gear drive.
    2. Schneider electronics 
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. is a 3MM anti-sliding PVC conveyor belt
    5. Precision 0.75kw lifting motor for height adjustment
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    RequirementsOperating : 460 Volt/60Hz/3 Phase

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    Features: 
    Working : 24”, 42”, 51”Service side: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding


    WTM-QSG series machine is a with a for the setting.
    : 3/16” – 4”
    length: 13”
    Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working widths: 24”, 42”, 51”
    side: left Enclosed Motors
    for cleaning after sanding

    General technical data: WTM-DSG series machine is a constant pass-line, bottom sanding machine, it is specially designed for a sanding line with a fixed height.Working : 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is . (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:: 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination


    Working : 24”, 42”, 51”
    Service side: left 
    Enclosed Motors
    for cleaning after

    General technical data: 
    WTM-FSG machine is a constant pass-line , it is specially designed for a with a fixed height
    Working : 3/16” – 4”
    Minimum working length: 13”Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a