• Double Head Roll Coater

    Double Head Roll Coater Specifications

    Model: WTM-UVRCD series

    Application: 
    for or stain on , , panels etc.

    Specifications: 
    1. in  24”, 36”, 51” Widths
    2. Work piece thickness: 2-80mm
    3. Min working length: 300mm 
    4. : 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm

    : 
    1. Italian JMC Aluminum alloy reduction gear drive.
    2.  
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. Conveyor belt is a 3MM anti-sliding PVC conveyor belt
    5. Precision automatic 0.75kw lifting motor for
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    Electrical RequirementsOperating : 460 Volt/60Hz/3 Phase

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    : 
    Working widths: 24”, 42”, 51”: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    General Technical Data: 
    WTM-QSG series machine is a with a movable feed belt for the setting.
    Working thickness: 3/16” – 4”
    Minimum working length: 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is . (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working widths: 24”, 42”, 51”
    Service side: left 
    Brush unit for cleaning after sanding

    : WTM-DSG is a constant pass-line, bottom , it is specially designed for a sanding line with a fixed height.Working thickness: 3/16” – 4”
    Minimum working length: 13”
    : 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    : 
    : 24”, 42”, 51”
    side: left 

    Brush unit for cleaning panels after sanding

    : 
    WTM-FSG series machine is a , it is specially designed for a sanding line with a fixed height
    Working thickness: 3/16” – 4”
    : 13”: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Horizontal Band Saws

    Model: 
    WTM-400Z2 and WTM-400Z3

    Model Name: 
    Two or Three heads HD Horizontal Band Saw
    Max. : 300mm
    Thickness of production board: 5-130mm
    Width of : 375mm
    Diameter of : 711mm
    Diameter of : 711mm
    Feeding speed: 0-15m/min
    : 50-60kg/cm
    Size of : 185”
    Length, 2” wide, 1.6mm thick

    Requirements: 
    : 460V/60 HZ/3
    Full : 18.5 KW x 2 or 3 depending on the model
    Approx Overall dimension: 2800L x 2200W x 2000H 

    View Page

  • Panel Saws

    Multi-Blades Panel Saw line

    : 
    WTM-1600

    Multi-Blades Panel Saw: 
    Main Spindle Dia: 74mmSaw
    Blade Diameter: 205mm

    Max. :
    1600mm Working : 0-30mm
    Main Spindle speed: 2600rpm
    Feeding Speed:0-15m/min
    : 22kw
    Feeding  Motor Power: 1.5kw
    Min. Raw Panel Width: 650mm
    Rubber : 12pcsAnti-kickback safeguard

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3
    Options:
    Semi-automatic hydraulic lifting and receiving table: 
    Max Weight Loading:3000kgs
    Lift Table : 1600 X 2400mm

    Automatic pusher (including CNC lift table): 
    Automatic push plate stroke: 3000mm 
    Push plate thickness: 8-100mm
    Push speed: 0-25m/min
    Frequency conversion motor power:0.75kw
    Table Size: 1600*2400 Max Weight Loading: 3000kgs
    :3kw
    System: Delta PLC control connect Pusher and lift table

    View Page