• Single Head Roll Coater

    Model Name: Roll Coater

    : WTM-UVRC series

    Application:
    Roll coating for finish on wood furniture, , panels etc.

    Specifications:
    1.   in  24”, 36”, 51” Widths
    2. : 2-80mm
    3. Min : 300mm 
    4. : 5-20m/min
    5. Available in single  
    6. Working height: 800mm

    Feature:
    1. Italian JMC Aluminum alloy reduction gear drive.
    2. Schneider  
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. Conveyor belt is a 2MM anti-sliding PVC conveyor belt
    5. Precision automatic 0.75kw for height adjustment
    6. All adjustments are fittied with individual counters
    7. Rubber or sponge heads available per customers need

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3

    View Page

  • Grain Filling Machine

    Model: WTM-UVGF Series

    : 
    Reverse roll coating for grain fill on wood furniture, flooring, panels etc.

    Specifications: 
    1. Available in  24”, 36”, 51”
    2. Work piece : 2-80mm
    3. Min working length: 300mm 
    4. : 5-20m/min
    5. Available in single or double

    Feature:
    1. JMC Aluminum alloy reduction gear drive.
    2. Filler scrape wheel equipped with RV reducer to control scraper uniformity.
    3. Schneider electronics 
    4. High-quality coupling transmission. NSK Japanese bearings.
    5. Conveyor belt is a 2MM anti-sliding PVC conveyor belt
    6. Precision    for
    7. All adjustments are fittied with individual counters

    Requirements: 
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Airjet/IR Tunnel

    Airjet/IR Leveling Tunnel
    Used for drying and leveling of waterbased and reactive finishes

    Model: WTM-UVIR series

    Specifications:
    1. in  24”, 36”, 51” Widths
    2. : 2-80mm
    3. : 5-20m/min
    4. Available in 24', 36' and 48' lengths
    5. : 800mm

    :
    1. Conveyor is a
    2. Heating using IR ceramic 0.3kw lamp tube and 30kw heating box.
    3. Temperature control adopts independent control, accurately control the temperature. The side cover of the oven is easy to be disassembled and installed convenient for maintenance.
    4. Side covers open for convenient lamp disassembly or maintenance. 
    5. 5.5KW high pressure fan, sprayed and dried by 38 jet tip

    :
    : 460 Volt/60Hz/3

    View Page

  • Stain Brushing Machine

    Model: WTM-UVBR Series

    Name: 

    Application: 
    Specially designed for stain or other finishes on , flooring, panels etc. 

    Specifications:
    1. Available in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 2,3 or 4 head
    5. : 800mm

    :
    1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
    2. Driving motor 1.5kw Schneider Inverter control
    3. The brush heads slide out for easy cleaning.
    4. Variable speed drives on each brush.

    Requirements:
    Operating : 460 Volt/60Hz/3 Phase

    View Page

  • Transfer Conveyor

    Automatic Transfer Conveyor

    Model: 
    WTM-UVC Series

    Specifications: 
    1. in  24”, 36”, 51”
    2. : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 6', 8', 10'
    5. : 800mm
    6. Total power: 0.75kw

    :
    1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
    2. use 0.75kw Taiwan RV63/30 reduction gears
    3. converter controls belt speed

    :
    Operating : 460 Volt/60Hz/3 Phase

    View Page

  • Double Head Roll Coater

    Double Head Roll Coater Specifications

    Model: WTM-UVRCD series

    Application: 
    Roll coating for or on wood furniture, flooring, panels etc.

    : 
    1. Available in  24”, 36”, 51”
    2. Work piece : 2-80mm
    3. Min working length: 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm

    Features: 
    1. Italian JMC Aluminum alloy reduction gear drive.
    2. Schneider electronics 
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. is a 3MM anti-sliding PVC belt
    5. Precision 0.75kw lifting motor for
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    : 
    Working widths: 24”, 42”, 51”Service side: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    : 
    WTM-QSG series machine is a with a for the thickness setting.
    Working thickness: 3/16” – 4”
    Minimum : 13”
    : 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is . (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    : 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: : 24”, 42”, 51”
    Service side: left 
    for cleaning panels after sanding

    General technical data: WTM-DSG is a constant pass-line, bottom sanding machine, it is specially designed for a sanding line with a fixed height.: 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:Operating : 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working widths: 24”, 42”, 51”
    side: left 
    Enclosed Motors
    for cleaning panels after sanding

    General technical data: 
    WTM-FSG series is a constant pass-line sanding machine, it is specially designed for a with a fixed height
    Working thickness: 3/16” – 4”
    length: 13”: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is . (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    : 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page