• Industrial Roll Coaters

    Roll Coater

    Heavy Duty Industrial Roll Coaters

    Feature Overview: Our industrial Roll Coaters feature a wide range of working , adjustable working , infeed and , heavy-duty , intuitive/durable control panel, leveling feet, lift points, and are in double, or triple head .

    Our high-flow air handling compatibility gives our industrial wide-belt impressive performance for dust collection. Safety features include disc brakes for emergency stop. (see individual product pages for additional specifics)

    Multi-head Roll Coaters increase the efficiency of any line. Single-pass coating reduces handling, and increases daily output.

    Industrial Belt Sander Requirements: Operating voltage: 460 Volt/60Hz/3 Phase (check with us for other options).

    Our Roll Coaters

    View Page

  • Industrial Wide-Belt Sanders

    3-Head Wide Belt Sander
    Wide-Belt Sander

    Heavy Duty Industrial Wide-Belt Sanders

    Overview: Our wide-belt sanders feature a wide range of , adjustable working thickness, infeed and outfeed, heavy-duty hinged access doors, intuitive/durable control panel, leveling feet, lift points, and are available in different head configurations.

    Our high-flow air handling compatibility gives our industrial wide-belt sanders impressive performance for . Safety features include heavy duty disc brakes for emergency stop. (see individual product pages for additional specifics)

    Wide-Belt Sanders can improve the efficiency of any finish line, or . With a multi-head wide belt sander, swift, single pass is possible.

    Industrial Belt Sander : : 460 Volt/60Hz/3 (check with us for other options).
    ** Also available in a

    Our Wide Belt Sanders

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    : 
    : 24”, 42”, 51”Service side: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    General Technical Data: 
    WTM-QSG series is a precision sander with a movable feed belt for the setting.
    Working thickness: 3/16” – 4”
    Minimum working length: 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    : 460 Volt/60Hz/3
    ** Also available in a Double

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working widths: 24”, 42”, 51”
    Service side: left 
    Brush unit for cleaning after sanding

    : WTM-DSG is a constant pass-line, bottom sanding machine, it is specially designed for a with a fixed height.Working thickness: 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    :Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page