• Denibbing Machine

    Model: WTM-UVDB Series

    Model Name: 
    Denibbing/ machine. This machine is for denibbing/sanding of , flooring, etc.

    Specifications:
    1. in  24”, 36”, 51” Widths
    2. Work piece : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 2-6 head configurations
    5. Working height: 800mm

    Features:
    1. thickness 5mm, high temperature resistance fish bone belt.
    2. Schneider
    3. Delta frequency converter control each brushing heads individually
    4. Adjustable height pressure - 2 rolls per head
    5. Height counters with individual height adjustment
    6. Multiple , and brush lengths available
    Optional – Precision automatic for height adjustment

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Wire Brushing/Denibbing Machine

    Model: WTM-UVWB Series

    Model Name: 
    / Denibbing Sanding

    Application:
    Wire brushing, embossment, texturing, of the grain in , flooring, panels etc.

    Specifications:
    1.   in  24”, 36”, 51”
    2. Work piece : 2-80mm
    3. Min working length: 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in 2-6 head

    Features:
    1. thickness 5mm, high temperature resistance fish bone belt.
    2. Schneider
    3. Delta frequency converter control each brushing heads individually
    4. Adjustable height pressure roller- 2 rolls per head
    5. Height counters with individual height adjustment
    6. Multiple and bristle lengths available
    * Optional -Precision automatic lifting motor for height adjustment

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Single Head Roll Coater

    Model Name: Roll Coater

    Model: WTM-UVRC series

    Application:
    for on , flooring, panels etc.

    :
    1.  Available in  24”, 36”, 51” Widths
    2. : 2-80mm
    3. Min working length: 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in single  head configuration
    6. : 800mm

    Feature:
    1. Italian JMC Aluminum alloy reduction gear drive.
    2. Schneider electronics 
    3. High- coupling transmission. NSK Japanese bearings.
    4. belt is a 2MM anti-sliding PVC conveyor belt
    5. Precision automatic 0.75kw lifting motor for
    6. All adjustments are fittied with individual counters
    7. Rubber or sponge heads available per customers need

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3

    View Page

  • Grain Filling Machine

    Model: WTM-UVGF Series

    : 
    Reverse for grain fill on , flooring, panels etc.

    Specifications: 
    1. in  24”, 36”, 51” Widths
    2. Work piece thickness: 2-80mm
    3. Min : 300mm 
    4. : 5-20m/min
    5. Available in single or double head configuration

    :
    1. Italian JMC Aluminum alloy reduction gear drive.
    2. Filler scrape wheel equipped with RV reducer to control scraper uniformity.
    3. Schneider  
    4. High-quality coupling transmission. NSK Japanese bearings.
    5. belt is a 2MM anti-sliding PVC conveyor belt
    6. Precision automatic  lifting motor for height adjustment
    7. All adjustments are fittied with individual counters

    Electrical Requirements: 
    : 460 Volt/60Hz/3 Phase

    View Page

  • Stain Brushing Machine

    Model: WTM-UVBR Series

    Model Name: 
    Stain

    Application: 
    Specially designed for brushing stain or other on , , panels etc. 

    Specifications:
    1. Available in  24”, 36”, 51” Widths
    2. Work piece thickness: 2-80mm
    3. : 5-20m/min
    4. Available in 2,3 or 4
    5. Working height: 800mm

    :
    1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
    2. Driving motor 1.5kw Schneider Inverter control
    3. The brush heads slide out for easy cleaning.
    4. Variable speed drives on each brush.

    Requirements:
    Operating voltage: 460 Volt/60Hz/3

    View Page

  • Double Head Roll Coater

    Double Head Roll Coater Specifications

    Model: WTM-UVRCD

    Application: 
    Roll coating for finish or on wood furniture, flooring, etc.

    Specifications: 
    1. Available in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. Min working length: 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm

    : 
    1. JMC Aluminum alloy reduction gear drive.
    2. Schneider electronics 
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. belt is a 3MM anti-sliding PVC conveyor belt
    5. Precision 0.75kw lifting motor for
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    Electrical Requirements: 460 Volt/60Hz/3 Phase

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    Features: 
    Working widths: 24”, 42”, 51”Service side: left 
    Enclosed MotorsBrush unit for cleaning after sanding

    : 
    WTM-QSG machine is a with a for the thickness setting.
    Working thickness: 3/16” – 4”
    length: 13”
    Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working : 24”, 42”, 51”
    Service side: left Enclosed Motors
    Brush unit for cleaning after sanding

    : WTM-DSG series machine is a constant pass-line, bottom , it is specially designed for a with a fixed height.Working thickness: 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:Operating : 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working widths: 24”, 42”, 51”
    side: left 
    Enclosed Motors
    Brush unit for cleaning after sanding

    General technical data: 
    WTM-FSG series is a constant pass-line sanding machine, it is specially designed for a sanding line with a fixed height
    Working : 3/16” – 4”
    Minimum working length: 13”Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    : 460 Volt/60Hz/3 Phase
    ** Also available in a

    View Page