• Industrial PUR Glue Line

    Wide-Belt Sander

    Subhead

    Copy: Our industrial PUR Glue Line features a wide range of working widths, adjustable working thickness, and outfeed, heavy-duty , intuitive/durable , , lift points, and are available in double, or triple head .

    include emergency stop. (see individual product pages for additional specifics)

    PUR Glue Line : Operating : 460 Volt/60Hz/3 (check with us for other options).

    Our PUR Glue Line Equipment

    View Page

    The Woodtech Difference!

    January 22, 2018

    The Woodtech Difference!

    March 26, 2024

  • Industrial Roll Coaters

    Roll Coater

    Heavy Duty Industrial Roll Coaters

    Overview: Our Roll Coaters feature a wide range of , adjustable working , infeed and outfeed, heavy-duty hinged access doors, intuitive/durable control panel, , , and are available in double, or triple head .

    Our high-flow air handling compatibility gives our industrial wide-belt impressive performance for . Safety features include heavy duty disc brakes for emergency stop. (see individual product pages for additional specifics)

    Multi-head Roll Coaters increase the efficiency of any finish line. Single-pass coating reduces handling, and increases daily output.

    Industrial Belt Sander : Operating voltage: 460 Volt/60Hz/3 Phase (check with us for other options).

    Our Roll Coaters

    View Page

  • Industrial Wide-Belt Sanders

    3-Head Wide Belt Sander
    Wide-Belt Sander

    Heavy Duty Industrial Wide-Belt Sanders

    Feature Overview: Our industrial wide-belt feature a wide range of working widths, adjustable working thickness, infeed and , heavy-duty hinged access doors, intuitive/durable control panel, feet, , and are available in different .

    Our high-flow air handling compatibility gives our industrial wide-belt sanders impressive performance for . Safety features include heavy duty disc brakes for emergency stop. (see individual product pages for additional specifics)

    Wide-Belt Sanders can improve the efficiency of any finish line, or wood production. With a multi-head , swift, single pass is possible.

    Industrial Belt Sander : Operating : 460 Volt/60Hz/3 Phase (check with us for other options).
    ** Also available in a Double Head configuration

    Our Wide Belt Sanders

    View Page

  • Straight Line Rip Saw

    Model: WTM-SLR460

    Model Name:  

    :
    Working : 10-90mm
    Min. Working Length: 200mm
    : 460mm
    Main Motor Power: 11kw
    Feeding Motor Power: 1.5kw
    Elevation Motor Power: 0.25kw
    Total Motor Power: 12.75kw
    : 10-33m/min
    : 2900 rpm
    : 350-400mm

    Requirements:
    Operating : 460 Volt/60Hz/3 Phase


    Model: WTM-SLR660

    Model Name: 
    Straight line rip saw 

    Specification:
    Working Thickness: 10-90mm
    Min. Working Length: 260mm
    Max. Working : 660mm
    Main Motor Power: 15kw
    Feeding Motor Power: 2.2kw
    Elevation Motor Power: 0.25kw
    Total Motor Power: 17.45kw
    Feeding Speed: 10-33m/min
    Spindle Speed: 3000 rpm
    Saw Blade Dia.: 400-450mm

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    : 
    Working widths: 24”, 42”, 51”: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    General Technical Data: 
    WTM-QSG series machine is a with a movable feed belt for the thickness setting.
    Working thickness: 3/16” – 4”
    : 13”
    Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    Operating voltage: 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working widths: 24”, 42”, 51”
    Service side: left Enclosed Motors
    Brush unit for cleaning after sanding

    General technical data: WTM-DSG is a constant pass-line, bottom sanding machine, it is specially designed for a sanding line with a fixed height.Working : 3/16” – 4”
    : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:Operating : 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working : 24”, 42”, 51”
    Service side: left 
    Enclosed Motors
    Brush unit for cleaning panels after

    : 
    WTM-FSG series is a constant pass-line , it is specially designed for a sanding line with a fixed height
    : 3/16” – 4”
    Minimum : 13”Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    : 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Panel Saws

    Multi-Blades Panel Saw line

    : 
    WTM-1600

    Multi-Blades Panel : 
    Main Spindle Dia: 74mmSaw
    Blade Diameter: 205mm

    Max. Working :
    1600mm Working : 0-30mm
    Main : 2600rpm
    Feeding Speed:0-15m/min
    : 22kw
    Feeding  Motor Power: 1.5kw
    Min. Raw Panel Width: 650mm
    Rubber Roller: 12pcsAnti-kickback safeguard

    Electrical Requirements:
    : 460 Volt/60Hz/3
    Options:
    Semi- hydraulic lifting and receiving table: 
    Max Weight Loading:3000kgs
    Lift Table : 1600 X 2400mm

    Automatic pusher machine (including CNC lift table): 
    Automatic push plate stroke: 3000mm 
    Push plate thickness: 8-100mm
    Push speed: 0-25m/min
    Frequency conversion motor power:0.75kw
    Table Size: 1600*2400 Max Weight Loading: 3000kgs
    Feeding Motor Power:3kw
    System: Delta PLC control connect Pusher and lift table

    View Page