• Optimizing Saw

    Optimizing Saw WTM-CS20x

    Wood Dimensions:
    Ingoing min./max. 800mm – unlimited
    Ingoing widths min./max. 50 – 300mm
    Ingoing thicknesses min./max.2 – 12mm
    Cross sections max. 300x5mmm max. 150x80mm
    : +/- 0.5 – +/- 1.5mm

    : 
    cycle: 1-6 times per second (servo drive)
    infinitely adjustable: 0-120 m/min.
    : 35”

    Requirements:
    Operating : 460 Volt/60Hz/3
    Full electrical load: 20.5 kW
    Operating load:  8 kW
    Operating voltage: 460 Volt/60Hz/3
    PhaseAir consumption: approx. 1200 L/min.
    Service pressure: approx. 30m/sec
    Diameter of dust exhaust ducts: 120mm (2pcs)

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    Features: 
    : 24”, 42”, 51”Service side: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    General Technical Data: 
    WTM-QSG series is a with a for the thickness setting.
    : 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is . (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3
    ** Also available in a Double

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: : 24”, 42”, 51”
    Service side: left Enclosed Motors
    Brush unit for cleaning after sanding

    : WTM-DSG machine is a constant pass-line, bottom sanding machine, it is specially designed for a sanding line with a fixed height.Working thickness: 3/16” – 4”
    Minimum : 13”
    : 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:Operating : 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    : 
    : 24”, 42”, 51”
    Service side: left 

    Brush unit for cleaning after sanding

    General technical data: 
    WTM-FSG machine is a constant pass-line sanding machine, it is specially designed for a sanding line with a fixed height
    Working thickness: 3/16” – 4”
    : 13”Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is . (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    Operating : 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • PUR Glue Line

    PUR Automatic Floor Laminating Line

    Model – WTM-PUR-350

    : 
    Working : 100–350mm  
    : 9-18mm 
    Feed Speed: 5-15m/minAir consumption: 0.1 CBM/min
    Approx : 17.4L x 1.6W × 1.4H

    Electrical Requirements: 
    Operating : 460 Volt/60Hz/3
    :
    : 0.75KW X 2 
    Lifting motor: 0.37KW
    Dosing : 0.37KW
    Power: 3KW X 2 (Oil heating) 
    Coating Roller: 240×500 
    SiliconDosing roller: 216×500
    Chrome Electrical thickness adjustment
    Manual glue thickness control
    Pinch Roll: Chain Drive Drive Power: 4kw Manual thickness control
    Pneumatic pressure, 4 sections
    First section pressing rolls: rubber with 40 Durometer
    2-3 -4 sections pressing rolls: Aluminum

    View Page