• The Woodtech Difference!

    Thank-you for your interest in our woodworking machines here at WoodTech , LLC! A couple points that we would like to bring to your attention! Over the last decade, we have seen a lack of quality woodworking machines in the market. In an effort to bridge the gap of machines, and . Our enable us to manufacture heavy duty, quality machinery at prices that are affordable.

    These machines are built to our , with quality that are readily available here in the USA. We have a team of technicians that can service the machines on short notice, and have parts on the shelf ready-to-ship for any issues that may arise.

    We provide Plant Layout Consultation, Field Service, and , to make your next equipment purchase as easy as possible. As a family of lifelong woodworkers, we are proud to offer these for your production facility.

    Please contact us today regarding your woodworking equipment needs.

    View Page

    The Woodtech Difference!

    January 22, 2018

  • About Us

    Letter From the Founder

    I wanted to take a moment to say thank you for your interest in our . Here are Woodtech , LLC, we take pride in what we do. Our daily goal is to bring quality woodworking machines to the market, and offer them at a fair and . Couple that with , and we feel like we have found a winning . 

    Machinery and woodworking has been in our family for years. My father ran a machine shop for over 40 years building machinery for sawmills and woodworking facilities. I personally started and operated a successful wood products company for 14 years. I say that to bring to light the fact that not only are we familiar with machinery, we have also operated these types of machines as a manufacturer over the years. This has significantly informed our process in manufacturing quality machines. These machines are products we would be proud of to have in our own manufacturing business. once said – Well done is better than well said. I can sit here at my desk all day, and this paper I'm writing this on will allow me to write anything that I want, But in the end, I would rather humbly ask that you give us the opportunity to work for you, and show you how we can help you with your machinery needs.

    From our family to yours!
    We wish you many !

    View Page

  • Optimizing Saw

    Optimizing Saw WTM-CS20x

    Wood Dimensions:
    Ingoing min./max. 800mm – unlimited
    Ingoing min./max. 50 – 300mm
    Ingoing thicknesses min./max.2 – 12mm
    Cross sections max. 300x5mmm max. 150x80mm
    Cutting tolerance: +/- 0.5 – +/- 1.5mm

    : 
    cycle: 1-6 times per second (servo drive)
    infinitely adjustable: 0-120 m/min.
    : 35”

    :
    Operating voltage: 460 Volt/60Hz/3
    Full electrical load: 20.5 kW
    Operating load:  8 kW
    Operating voltage: 460 Volt/60Hz/3
    PhaseAir consumption: approx. 1200 L/min.
    Service pressure: approx. 30m/sec
    Diameter of : 120mm (2pcs)

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    : 
    Working : 24”, 42”, 51” side: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    General Technical Data: 
    WTM-QSG series machine is a with a movable feed belt for the thickness setting.
    : 3/16” – 4”
    length: 13”
    : 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    : 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: : 24”, 42”, 51”
    Service side: left Enclosed Motors
    Brush unit for cleaning after sanding

    General technical data: WTM-DSG series machine is a constant pass-line, bottom sanding machine, it is specially designed for a with a fixed height.Working : 3/16” – 4”
    length: 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    :: 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working : 24”, 42”, 51”
    : left 
    Enclosed Motors
    Brush unit for cleaning after sanding

    : 
    WTM-FSG series machine is a constant pass-line sanding machine, it is specially designed for a sanding line with a fixed height
    Working thickness: 3/16” – 4”
    Minimum : 13”Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • The Woodtech Difference!

    Thank-you for your interest in our quality here at WoodTech , LLC! A couple points that we would like to bring to your attention! Over the last decade, we have seen a lack of quality woodworking machines in the market. In an effort to bridge the gap of machines, and competitive pricing. Our overseas partnerships enable us to manufacture heavy duty, quality machinery at prices that are affordable.

    These machines are built to our specifications, with quality that are readily available here in the USA. We have a team of that can service the machines on short notice, and have parts on the shelf ready-to-ship for any issues that may arise.

    We provide Plant Layout Consultation, Field Service, and , to make your next purchase as easy as possible. As a family of lifelong , we are proud to offer these for your production facility.

    Please contact us today regarding your woodworking equipment needs.

    View Page

    The Woodtech Difference!

    March 26, 2024