• Gang Rip Saw

    Model Name: Movable Gang Rip Saw  

    Model: 
    WTM-RIP350

    Specification:
    1. : 350mm
    2. Max cutting : 10-100mm
    3. : 750mm
    4. Number of : Movable 3 blades
    5. blade dia.: 300-400mm
    6. : 4200 rpm
    7. : 44-66 m/sec
    8. Feeding motor speed: 6-48m/min
    9. Number of saw blades: 6 blades
    10. Saw spindle dia.: 65mm
    11. Number of pressure rollers: 4
    12. Electronic lasers for each blade

    :
    Operating : 460 Volt/60Hz/3

    View Page

  • Straight Line Rip Saw

    Model: WTM-SLR460

    : Straight line rip  

    Specification:
    : 10-90mm
    Min. : 200mm
    Max. : 460mm
    Main Motor Power: 11kw
    Feeding Motor Power: 1.5kw
    Elevation Motor Power: 0.25kw
    : 12.75kw
    Feeding Speed: 10-33m/min
    Spindle Speed: 2900 rpm
    Dia.: 350-400mm

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3


    Model: WTM-SLR660

    Model Name: 
    Straight line rip saw 

    Specification:
    Working : 10-90mm
    Min. Working Length: 260mm
    Max. Working : 660mm
    Main Motor Power: 15kw
    Feeding Motor Power: 2.2kw
    Elevation Motor Power: 0.25kw
    Total Motor Power: 17.45kw
    Feeding Speed: 10-33m/min
    Spindle Speed: 3000 rpm
    Saw Blade Dia.: 400-450mm

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Wire Brushing/Denibbing Machine

    Model: WTM-UVWB Series

    Name: 
    Wire brushing/ Denibbing Sanding

    :
    Wire brushing, embossment, texturing, of the grain in wood furniture, , panels etc.

    Specifications:
    1.  Available in  24”, 36”, 51” Widths
    2. Work piece thickness: 2-80mm
    3. Min : 300mm 
    4. : 5-20m/min
    5. Available in 2-6 head configurations

    Features:
    1. Feed belt thickness 5mm, high temperature resistance fish bone belt.
    2. Schneider Electronics
    3. Delta control each brushing heads individually
    4. Adjustable height pressure - 2 rolls per head
    5. Height counters with individual height adjustment
    6. Multiple wire diameter and lengths available
    * Optional -Precision lifting motor for height adjustment

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Single Head Roll Coater

    Model Name: Roll Coater

    Model: WTM-UVRC series

    :
    Roll coating for finish on , flooring, etc.

    Specifications:
    1.  Available in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. Min : 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in single  head configuration
    6. Working height: 800mm

    Feature:
    1. JMC Aluminum alloy reduction gear drive.
    2.  
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. Conveyor belt is a 2MM anti-sliding PVC conveyor belt
    5. Precision 0.75kw lifting motor for height adjustment
    6. All adjustments are fittied with individual counters
    7. Rubber or sponge heads available per customers need

    Requirements:
    Operating voltage: 460 Volt/60Hz/3

    View Page

  • Grain Filling Machine

    Model: WTM-UVGF Series

    Application: 
    Reverse roll coating for grain fill on wood furniture, , panels etc.

    Specifications: 
    1. in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. Min : 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in single or

    :
    1. JMC alloy reduction gear drive.
    2. Filler scrape wheel equipped with RV reducer to control scraper uniformity.
    3. Schneider electronics 
    4. High- coupling transmission. NSK Japanese bearings.
    5. Conveyor belt is a 2MM anti-sliding PVC conveyor belt
    6. Precision automatic  lifting motor for height adjustment
    7. All adjustments are fittied with individual counters

    Electrical Requirements: 
    : 460 Volt/60Hz/3 Phase

    View Page

  • Double Head Roll Coater

    Double Head Roll Coater Specifications

    Model: WTM-UVRCD series

    Application: 
    Roll coating for or stain on , flooring, panels etc.

    Specifications: 
    1. Available in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. Min working length: 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm

    Features: 
    1. JMC Aluminum alloy reduction gear drive.
    2. Schneider electronics 
    3. High- coupling transmission. NSK Japanese bearings.
    4. belt is a 3MM anti-sliding PVC conveyor belt
    5. Precision automatic 0.75kw for height adjustment
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    Requirements: 460 Volt/60Hz/3

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    Features: 
    : 24”, 42”, 51” side: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    : 
    WTM-QSG series machine is a with a movable feed belt for the thickness setting.
    Working thickness: 3/16” – 4”
    : 13”
    Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    :
    Operating voltage: 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: : 24”, 42”, 51”
    side: left Enclosed Motors
    for cleaning panels after

    General technical data: WTM-DSG series machine is a constant pass-line, bottom sanding machine, it is specially designed for a sanding line with a fixed height.: 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:Operating : 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    : 24”, 42”, 51”
    side: left 
    Enclosed Motors
    Brush unit for cleaning panels after sanding

    : 
    WTM-FSG series machine is a constant pass-line sanding machine, it is specially designed for a with a fixed height
    Working : 3/16” – 4”
    Minimum working length: 13”Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    :
    : 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page