• The Woodtech Difference!

    Thank-you for your interest in our machines here at , LLC! A couple points that we would like to bring to your attention! Over the last decade, we have seen a lack of quality in the market. In an effort to bridge the gap of heavy duty machines, and competitive pricing. Our enable us to manufacture heavy duty, quality at prices that are affordable.

    These machines are built to our specifications, with quality parts that are readily available here in the USA. We have a team of technicians that can service the machines on short notice, and have parts on the shelf ready-to-ship for any issues that may arise.

    We provide Plant Layout Consultation, , and Competitive Financing, to make your next equipment purchase as easy as possible. As a family of lifelong woodworkers, we are proud to offer these for your .

    Please contact us today regarding your woodworking equipment needs.

    View Page

    The Woodtech Difference!

    January 22, 2018

  • Industrial Roll Coaters

    Roll Coater

    Heavy Duty Industrial Roll Coaters

    Feature Overview: Our industrial Roll Coaters feature a wide range of , adjustable working thickness, and , heavy-duty hinged access doors, intuitive/durable control panel, feet, lift points, and are available in double, or triple head configurations.

    Our high-flow compatibility gives our industrial wide-belt impressive performance for dust collection. Safety include heavy duty disc brakes for emergency stop. (see individual product pages for additional specifics)

    Multi-head Roll Coaters increase the efficiency of any finish line. Single-pass coating reduces handling, and increases daily output.

    Industrial Belt Sander Requirements: Operating : 460 Volt/60Hz/3 (check with us for other options).

    Our Roll Coaters

    View Page

  • Industrial Wide-Belt Sanders

    3-Head Wide Belt Sander
    Wide-Belt Sander

    Heavy Duty Industrial Wide-Belt Sanders

    Feature Overview: Our industrial wide-belt sanders feature a wide range of working , adjustable working thickness, infeed and , heavy-duty , intuitive/durable control panel, , lift points, and are available in different head configurations.

    Our high-flow compatibility gives our industrial wide-belt sanders impressive performance for dust collection. Safety include heavy duty disc brakes for emergency stop. (see individual product pages for additional specifics)

    Wide-Belt Sanders can improve the efficiency of any , or . With a multi-head wide belt sander, swift, single pass is possible.

    Industrial Belt Sander Electrical Requirements: Operating : 460 Volt/60Hz/3 Phase (check with us for other options).
    ** Also available in a Double Head configuration

    Our Wide Belt Sanders

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    Features: 
    : 24”, 42”, 51”: left 
    Enclosed MotorsBrush unit for cleaning after sanding

    General Technical Data: 
    WTM-QSG machine is a precision sander with a movable for the setting.
    Working thickness: 3/16” – 4”
    : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    Operating : 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    : Working widths: 24”, 42”, 51”
    side: left 
    Brush unit for cleaning panels after sanding

    : WTM-DSG series machine is a constant pass-line, bottom sanding machine, it is specially designed for a sanding line with a fixed height.Working thickness: 3/16” – 4”
    : 13”
    : 0-80 F/min
    Compressed : 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:: 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working widths: 24”, 42”, 51”
    : left 

    Brush unit for cleaning after sanding

    General technical data: 
    WTM-FSG series machine is a constant pass-line sanding machine, it is specially designed for a with a fixed height
    Working : 3/16” – 4”
    Minimum working length: 13”: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Moulders

    Heavy Duty 4 sided Moulder

    :
    WTM-330 – 12” wide – in 4, 5 or 6 .
    WTM-260- 10” wide – available in 4, 5 or 6 head configurations.
    WTM-230 – 9” wide – available in 4, 5 or 6 head configurations.
    WTM-200 – 7” wide – available in 4, 5 or 6 head configurations.

    Requirements: 
    Operating : 460 Volt/60Hz/3

    Available:
    *on WTM-330 , and side pressure
    PLC controlled – LCD readout drive motors
    Belt driven spindles
    Auto Lubrication
    Plus many more…

    View Page

  • The Woodtech Difference!

    Thank-you for your interest in our machines here at WoodTech Machinery, LLC! A couple points that we would like to bring to your attention! Over the last decade, we have seen a lack of quality woodworking machines available in the market. In an effort to bridge the gap of heavy duty machines, and . Our enable us to manufacture heavy duty, quality machinery at prices that are affordable.

    These machines are built to our specifications, with quality parts that are readily available here in the USA. We have a team of technicians that can the machines on short notice, and have parts on the shelf ready-to-ship for any issues that may arise.

    We provide , , and , to make your next purchase as easy as possible. As a family of lifelong , we are proud to offer these quality machines for your production facility.

    Please contact us today regarding your woodworking equipment needs.

    View Page

    The Woodtech Difference!

    March 26, 2024