Automatic Finger Jointer Line
Model:
WTM-1560x600IIGModel Name:
Automatic Finger Jointer lineMF756A Infeed strap conveyor:
Working table Length: 1150mm
working table width: 600mm Motor power: 0.375kwMXZ3515-II Auto finger shaper:
Table size: 850W x 600L mm
Max. working size: 850L x 80W x 150H mm
Min. working size: 200L x 30W x 20H mm
Shaper spindle diameter: 70mm
Shaper blade diameter: 160mm
Main saw blade size: 255mm
Shaper spindle speed: 5000 rpm
Main saw spindle speed: 2840 rpm
Working air pressure: 0.8
Mpa Total power: 16.12kwMF756B Middle strap conveyor:
Working table Length:1150mm
working table width: 600mm
Motor power: 0.375kwMXZ3515T-II Auto finger shaper(glue-spreading):
Table size(W x L): 850 x 600 mm
Max. working size(L x W x H): 850 x 80 x 150mm
Min. working size: 200L x 30W x 20H mm
Shaper spindle diameter: 70mm
Shaper blade diameter: 160mm
Main saw blade size: 255mm
Shaper spindle speed: 5000 rpm
Main saw spindle speed: 2840 rpm
Working air pressure: 0.8 Mpa
Total power:18.74kwMF746 Roller output conveyor,
MF761 Chain conveyor@2sets
(Include 1 set Tipper)MHZ 1560 Auto finger joint assembler:
Max. working size: 6000L x 150W x 80H mm
(1times can make 2 workpiece)
Min. working size: 1500L x 30W x 20H mm
Main saw blade size: 355mm
Working air pressure: 0.8 Mpa Max.
Jointing force: 7800kg
Total power: 8.45kwIn-Line Finish Sander
Model: WTM-UVS Series
Model Name:
In-line finish sanding machineApplication:
Sanding for PU, UV, PE finishesSpecification:
1. Available in 24”, 36”, 51” Widths
2. Workpiece thickness: 2-80mm
3. Feeding speed: 5-20m/min
4. Available in single or double head configuration
5. Working height: 800mm
7. Conveyor belt thickness- 5mm
8. Sanding belt size: 60” Length
9. Schneider electronics
10. Variable speed on sanding heads
11. Cleaning brush on the output sideElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3 PhasePUR Glue Line
PUR Glue Melter
Model:
WTM-PUR-120Specifications:
27kg/hour Application guns: 2
Size: 560x340x635mm
Main power: 7.8kwElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3 PhaseElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3
Motor rorating: 0.5-60/minHorizontal Band Saws
Model:
WTM-400Z2 and WTM-400Z3Model Name:
Two or Three heads HD Horizontal Band Saw
Max. workpiece size: 300mm
Thickness of production board: 5-130mm
Width of conveyor belt: 375mm
Diameter of saw roller: 711mm
Diameter of saw wheel: 711mm
Feeding speed: 0-15m/min
Hydraulic pressure: 50-60kg/cm
Size of saw blade: 185”
Length, 2” wide, 1.6mm thickElectrical Requirements:
Voltage: 460V/60 HZ/3 phase
Full electrical load: 18.5 KW x 2 or 3 depending on the model
Approx Overall dimension: 2800L x 2200W x 2000HHorizontal Band Saw
Model:
WTM-400ZModel Name:
HD Horizontal Band Saw
Max. workpiece size: 300mm
Thickness of production board: 5–160mm
Width of conveyor belt: 375mm
Diameter of saw wheel: 711mm
Feeding speed: 0-15m/min
Hydraulic pressure: 50-60kg/cm
Size of saw blade: 185”
Length, 2” wide, 1.6mm thickElectrical Requirements:
Voltage: 460V/60 HZ/3 phase
Full electrical load: 18.5 KW
Overall dimension: 2800L x 2200W x 2000H
Panel Saws
Multi-Blades Panel Saw line
Model:
WTM-1600Multi-Blades Panel Saw:
Main Spindle Dia: 74mmSaw
Blade Diameter: 205mmMax. Working Width:
1600mm Working Thickness: 0-30mm
Main Spindle speed: 2600rpm
Feeding Speed:0-15m/min
Main Motor Power: 22kw
Feeding Motor Power: 1.5kw
Min. Raw Panel Width: 650mm
Rubber Roller: 12pcsAnti-kickback safeguardElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3
Phase Options:
Semi-automatic hydraulic lifting and receiving table:
Max Weight Loading:3000kgs
Lift Table Size: 1600 X 2400mmAutomatic pusher machine (including CNC lift table):
Automatic push plate stroke: 3000mm
Push plate thickness: 8-100mm
Push speed: 0-25m/min
Frequency conversion motor power:0.75kw
Table Size: 1600*2400 Max Weight Loading: 3000kgs
Feeding Motor Power:3kw
System: Delta PLC control connect Pusher and lift table