• Industrial Wide-Belt Sanders

    3-Head Wide Belt Sander
    Wide-Belt Sander

    Heavy Duty Industrial Wide-Belt Sanders

    Feature Overview: Our industrial wide-belt feature a wide range of working , adjustable working , infeed and , heavy-duty hinged access doors, intuitive/durable control panel, leveling feet, lift points, and are available in different head configurations.

    Our high-flow compatibility gives our industrial wide-belt sanders impressive performance for . include disc brakes for emergency stop. (see individual product pages for additional specifics)

    Wide-Belt Sanders can improve the efficiency of any finish line, or wood production. With a multi-head wide belt sander, swift, single pass is possible.

    Industrial Belt Sander Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase (check with us for other options).
    ** Also available in a Double

    Our Wide Belt Sanders

    View Page

  • In-Line Finish Sander

    Model: WTM-UVS Series

    Model Name: 
    In-line finish machine

    :
    Sanding for PU, UV, PE finishes

    Specification:
    1. Available in  24”, 36”, 51” Widths
    2. Workpiece thickness: 2-80mm
    3. : 5-20m/min
    4. Available in single or
    5. : 800mm
    7. - 5mm
    8. : 60” Length
    9. Schneider electronics
    10. Variable speed on sanding heads
    11. Cleaning brush on the output side

    Requirements:
    Operating : 460 Volt/60Hz/3

    View Page

  • Grain Filling Machine

    Model: WTM-UVGF Series

    : 
    Reverse roll coating for grain fill on wood furniture, flooring, etc.

    Specifications: 
    1. in  24”, 36”, 51”
    2. : 2-80mm
    3. Min : 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in single or double head configuration

    :
    1. JMC Aluminum alloy reduction gear drive.
    2. Filler scrape wheel equipped with RV reducer to control scraper uniformity.
    3. Schneider electronics 
    4. High-quality coupling transmission. NSK Japanese bearings.
    5. is a 2MM anti-sliding PVC conveyor belt
    6. Precision automatic  lifting motor for height adjustment
    7. All adjustments are fittied with individual counters

    : 
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    : 
    Working widths: 24”, 42”, 51”Service side: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    : 
    WTM-QSG series is a with a movable feed belt for the thickness setting.
    Working thickness: 3/16” – 4”
    : 13”
    : 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    : 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    : Working widths: 24”, 42”, 51”
    Service side: left 
    Brush unit for cleaning after sanding

    : WTM-DSG series machine is a constant pass-line, bottom sanding machine, it is specially designed for a with a fixed height.Working thickness: 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    :Operating voltage: 460 Volt/60Hz/3
    ** Also available in a

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working widths: 24”, 42”, 51”
    Service side: left 
    Enclosed Motors
    Brush unit for cleaning after sanding

    General technical data: 
    WTM-FSG series is a , it is specially designed for a sanding line with a fixed height
    : 3/16” – 4”
    length: 13”Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is . (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3 Phase
    ** Also available in a

    View Page