• Double Head Roll Coater

    Double Head Roll Coater Specifications

    : WTM-UVRCD series

    Application: 
    Roll coating for or stain on wood furniture, , panels etc.

    Specifications: 
    1. Available in  24”, 36”, 51” Widths
    2. Work piece thickness: 2-80mm
    3. Min working length: 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm

    : 
    1. Italian JMC Aluminum alloy reduction gear drive.
    2. Schneider electronics 
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. belt is a 3MM anti-sliding PVC
    5. Precision 0.75kw for height adjustment
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    Operating voltage: 460 Volt/60Hz/3

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    Features: 
    Working widths: 24”, 42”, 51” side: left 
    Enclosed MotorsBrush unit for cleaning after sanding

    General Technical Data: 
    WTM-QSG series is a precision sander with a movable feed belt for the thickness setting.
    : 3/16” – 4”
    length: 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    : 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    : : 24”, 42”, 51”
    Service side: left Enclosed Motors
    for cleaning panels after

    : WTM-DSG series machine is a constant pass-line, bottom sanding machine, it is specially designed for a with a fixed height.: 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working : 24”, 42”, 51”
    Service side: left 
    Enclosed Motors
    Brush unit for cleaning panels after sanding

    General technical data: 
    WTM-FSG is a constant pass-line sanding machine, it is specially designed for a sanding line with a fixed height
    Working thickness: 3/16” – 4”
    : 13”Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is . (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    : 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page