• Denibbing Machine

    Model: WTM-UVDB Series

    Model Name: 
    Denibbing/ machine. This machine is for denibbing/sanding of wood furniture, flooring, etc.

    Specifications:
    1. Available in  24”, 36”, 51” Widths
    2. Work piece : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 2-6 head
    5. : 800mm

    :
    1. Feed belt thickness 5mm, high temperature resistance fish bone belt.
    2. Schneider Electronics
    3. control each brushing heads individually
    4. Adjustable height - 2 rolls per head
    5. Height counters with individual height adjustment
    6. Multiple sanding grits, and brush lengths available
    Optional – Precision automatic lifting motor for height adjustment

    Electrical Requirements:
    : 460 Volt/60Hz/3

    View Page

  • In-Line Finish Sander

    Model: WTM-UVS Series

    Name: 

    :
    for PU, UV, PE

    Specification:
    1. Available in  24”, 36”, 51” Widths
    2. Workpiece thickness: 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in single or double
    5. Working height: 800mm
    7. belt thickness- 5mm
    8. : 60” Length
    9.
    10. Variable speed on sanding heads
    11. Cleaning brush on the output side

    Electrical Requirements:
    : 460 Volt/60Hz/3 Phase

    View Page

  • Wire Brushing/Denibbing Machine

    Model: WTM-UVWB Series

    Model Name: 
    Wire brushing/  Sanding Machine

    :
    Wire brushing, embossment, texturing, of the grain in wood furniture, flooring, panels etc.

    Specifications:
    1.  Available in  24”, 36”, 51”
    2. Work piece : 2-80mm
    3. Min : 300mm 
    4. : 5-20m/min
    5. Available in 2-6 head configurations

    Features:
    1. thickness 5mm, high temperature resistance fish bone belt.
    2. Schneider Electronics
    3. Delta frequency converter control each brushing heads individually
    4. Adjustable height - 2 rolls per head
    5. Height counters with individual height adjustment
    6. Multiple and bristle lengths available
    * Optional -Precision automatic lifting motor for height adjustment

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3 Phase

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working widths: 24”, 42”, 51”
    side: left 
    Brush unit for cleaning after

    General technical data: WTM-DSG machine is a constant pass-line, bottom sanding machine, it is specially designed for a with a fixed height.Working thickness: 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:Operating voltage: 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    : 
    Working widths: 24”, 42”, 51”
    side: left 
    Enclosed Motors
    Brush unit for cleaning panels after

    General technical data: 
    WTM-FSG series machine is a constant pass-line sanding machine, it is specially designed for a with a fixed height
    Working : 3/16” – 4”
    : 13”Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page