Model: WTM-UVBR Series

Model Name: 
Stain Brushing Machine

Application: 
Specially designed for brushing stain or other finishes on wood furniture, flooring, panels etc. 

Specifications:
1. Available in  24”, 36”, 51” Widths
2. Work piece thickness: 2-80mm
3. Feeding speed: 5-20m/min
4. Available in 2,3 or 4 head configurations
5. Working height: 800mm

Feature:
1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
2. Driving motor 1.5kw Schneider Inverter control
3. The brush heads slide out for easy cleaning.
4. Variable speed drives on each brush.

Electrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase

Automatic Transfer Conveyor

Model: 
WTM-UVC Series

Specifications: 
1. Available in  24”, 36”, 51” Widths
2. Workpiece thickness: 2-80mm
3. Feeding speed: 5-20m/min
4. Available in 6’, 8’, 10’ lengths
5. Working height: 800mm
6. Total power: 0.75kw

Feature:
1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
2. Conveyor use 0.75kw Taiwan RV63/30 reduction gears
3. Schneider Frequency converter controls belt speed

Electrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase

Model: WTM-UVDRYER- Series

Model Name: 
UV dryer

Specifications:
1. Available in  24”, 36”, 51” Widths
2. Work piece thickness: 2-80mm
3. Feeding speed: 5-20m/min
4. Available in 2, 3 or 4 light configurations
5. Working height: 800mm
6. Automatic exhaust fans
7. Gallium and Mercery bulbs
8. Schneider Electronics
9. Conveyor is a stainless steel net

Electrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase

Double Head Roll Coater Specifications

Model: WTM-UVRCD series

Application: 
Roll coating for finish or stain on wood furniture, flooring, panels etc.

Specifications: 
1. Available in  24”, 36”, 51” Widths
2. Work piece thickness: 2-80mm
3. Min working length: 300mm 
4. Feeding speed: 5-20m/min
5. Available in double, or triple head configuration
6. Working height: 800mm

Features: 
1. Italian JMC Aluminum alloy reduction gear drive.
2. Schneider electronics 
3. High-quality coupling transmission. NSK Japanese bearings.
4. Conveyor belt is a 3MM anti-sliding PVC conveyor belt
5. Precision automatic 0.75kw lifting motor for height adjustment
6. All adjustments are fitted with individual counters
7. Rubber or sponge heads available per customers need
Optional – Double pumps and drains available for individual head use.
Electrical RequirementsOperating voltage: 460 Volt/60Hz/3 Phase

WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

Features: 
Working widths: 24”, 42”, 51”Service side: left 
Enclosed MotorsBrush unit for cleaning panels after sanding

General Technical Data: 
WTM-QSG series machine is a precision sander with a movable feed belt for the thickness setting.
Working thickness: 3/16” – 4”
Minimum working length: 13”
Feeding speed: 0-80 F/min
Compressed air consumption: 1.5 CBM/min
Overall dimension: 94”x82x80”
Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

Pressure Units: 
Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
1st head roller is steel with helical grooves for cooling.
-Hard Rubber roller is available. (optional)
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
2nd head roller is Rubber with helical grooves for cooling.
-Steel roller is available. (optional)
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
The 3rd sanding head is a combination of roller and pad.
-Pad can be adjusted up and down.
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

Electrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase
** Also available in a Double Head configuration

Heavy Duty 4 sided Moulder
WTM-DSG Series Bottom Surface Sander
Triple-belt sander roller + combination

Features: Working widths: 24”, 42”, 51”
Service side: left Enclosed Motors
Brush unit for cleaning panels after sanding

General technical data: WTM-DSG series machine is a constant pass-line, bottom sanding machine, it is specially designed for a sanding line with a fixed height.Working thickness: 3/16” – 4”
Minimum working length: 13”
Feeding speed: 0-80 F/min
Compressed air consumption: 1.5 CBM/min
Overall dimension: 94”x82x80”
Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
1st head roller is steel with helical grooves for cooling.
-Hard Rubber roller is available. (optional)
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
2nd head roller is Rubber with helical grooves for cooling.
-Steel roller is available. (optional)
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
The 3rd sanding head is a combination of roller and pad.
-Pad can be adjusted up and down.
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

Electrical Requirements:Operating voltage: 460 Volt/60Hz/3 Phase
** Also available in a Double Head configuration

WTM-FSG Series Constant Pass-Line, Top Surface Sander
Triple-belt sander roller + combination

Features: 
Working widths: 24”, 42”, 51”
Service side: left 
Enclosed Motors
Brush unit for cleaning panels after sanding

General technical data: 
WTM-FSG series machine is a constant pass-line sanding machine, it is specially designed for a sanding line with a fixed height
Working thickness: 3/16” – 4”
Minimum working length: 13”Feeding speed: 0-80 F/min
Compressed air consumption: 1.5 CBM/min
Overall dimension: 94”x82x80”
Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

Pressure Units: 
Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

Electrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase
** Also available in a Double Head configuration