Wide Belt Sanders
WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination
Features:
Working widths: 24”, 42”, 51”Service side: left
Enclosed MotorsBrush unit for cleaning panels after sandingGeneral Technical Data:
WTM-QSG series machine is a precision sander with a movable feed belt for the thickness setting.
Working thickness: 3/16” – 4”
Minimum working length: 13”
Feeding speed: 0-80 F/min
Compressed air consumption: 1.5 CBM/min
Overall dimension: 94”x82x80”
Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.Pressure Units:
Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
1st head roller is steel with helical grooves for cooling.
-Hard Rubber roller is available. (optional)
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
2nd head roller is Rubber with helical grooves for cooling.
-Steel roller is available. (optional)
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
The 3rd sanding head is a combination of roller and pad.
-Pad can be adjusted up and down.
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.Electrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase
** Also available in a Double Head configuration
Wide Belt Sanders
Heavy Duty 4 sided Moulder
WTM-DSG Series Bottom Surface Sander
Triple-belt sander roller + combinationFeatures: Working widths: 24”, 42”, 51”
Service side: left Enclosed Motors
Brush unit for cleaning panels after sandingGeneral technical data: WTM-DSG series machine is a constant pass-line, bottom sanding machine, it is specially designed for a sanding line with a fixed height.Working thickness: 3/16” – 4”
Minimum working length: 13”
Feeding speed: 0-80 F/min
Compressed air consumption: 1.5 CBM/min
Overall dimension: 94”x82x80”
Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
1st head roller is steel with helical grooves for cooling.
-Hard Rubber roller is available. (optional)
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
2nd head roller is Rubber with helical grooves for cooling.
-Steel roller is available. (optional)
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
The 3rd sanding head is a combination of roller and pad.
-Pad can be adjusted up and down.
-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.Electrical Requirements:Operating voltage: 460 Volt/60Hz/3 Phase
** Also available in a Double Head configurationWide Belt Sander
WTM-FSG Series Constant Pass-Line, Top Surface Sander
Triple-belt sander roller + combinationFeatures:
Working widths: 24”, 42”, 51”
Service side: left
Enclosed Motors
Brush unit for cleaning panels after sandingGeneral technical data:
WTM-FSG series machine is a constant pass-line sanding machine, it is specially designed for a sanding line with a fixed height
Working thickness: 3/16” – 4”
Minimum working length: 13”Feeding speed: 0-80 F/min
Compressed air consumption: 1.5 CBM/min
Overall dimension: 94”x82x80”
Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.Pressure Units:
Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.Electrical Requirements:
Operating voltage: 460 Volt/60Hz/3 Phase
** Also available in a Double Head configurationLinear Spray line
Automatic Profile Spraying Machine
Model:
WTM-SP400Specification:
Processing width: 10-400mm
Processing thickness: 10-100mm
Min. length: 400mm
Feeding speed: 0-50m/min
Spraying guns: 6 Working pressure: 0.5-0.8Mpa
Total power: 2.25KwElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3 PhaseReciprocal Spray Line
Automatic Reciprocal Spraying Machine
Model:
WTM-SP2500Specifications:
Max. working width: 1300mm
Max. working length: 2440mm
Max.spraying thickness: 150mmSpraying guns: 8
Working pressure: 06-0.8Mpa
Total power: 10.85kwElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3 PhasePanel Saws
Multi-Blades Panel Saw line
Model:
WTM-1600Multi-Blades Panel Saw:
Main Spindle Dia: 74mmSaw
Blade Diameter: 205mmMax. Working Width:
1600mm Working Thickness: 0-30mm
Main Spindle speed: 2600rpm
Feeding Speed:0-15m/min
Main Motor Power: 22kw
Feeding Motor Power: 1.5kw
Min. Raw Panel Width: 650mm
Rubber Roller: 12pcsAnti-kickback safeguardElectrical Requirements:
Operating voltage: 460 Volt/60Hz/3
Phase Options:
Semi-automatic hydraulic lifting and receiving table:
Max Weight Loading:3000kgs
Lift Table Size: 1600 X 2400mmAutomatic pusher machine (including CNC lift table):
Automatic push plate stroke: 3000mm
Push plate thickness: 8-100mm
Push speed: 0-25m/min
Frequency conversion motor power:0.75kw
Table Size: 1600*2400 Max Weight Loading: 3000kgs
Feeding Motor Power:3kw
System: Delta PLC control connect Pusher and lift tableThe Woodtech Difference!
Thank-you for your interest in our quality woodworking machines here at WoodTech Machinery, LLC! A couple points that we would like to bring to your attention! Over the last decade, we have seen a lack of quality woodworking machines available in the market. In an effort to bridge the gap of heavy duty machines, and competitive pricing. Our overseas partnerships enable us to manufacture heavy duty, quality machinery at prices that are affordable.
These machines are built to our specifications, with quality parts that are readily available here in the USA. We have a team of technicians that can service the machines on short notice, and have parts on the shelf ready-to-ship for any issues that may arise.
We provide Plant Layout Consultation, Field Service, and Competitive Financing, to make your next equipment purchase as easy as possible. As a family of lifelong woodworkers, we are proud to offer these quality machines for your production facility.
Please contact us today regarding your woodworking equipment needs.
Contact
